Amplifier modules by: Anaview Audaphon Detonation Hypex Mivoc Monacor Sitronik Visaton

HYPEX Amplifier Modules

Amplifier Module AS2.100(d)

Enlarge

The "AS2.100" is a plate amp for use in powered speaker systems. As an active speaker controller, a AS2.100 can form the basis of a powerful active two-way monitor. In stereo mode one AS2.100 will power an active master / passive slave pair. Finally, the module may also be used as a one-way 140W amplifier. All signal processing, including volume control, is done using the on-board DSP (digital signal processor).

When two modules are used, the second unit slaves to the first unit (master) through a link cable. The link cable (a stereo mini jack cable) carries both the right audio channel and control data. This way, both units respond to the masterís control panel.

A PC controls the AS2.100 through the USB port. This connection is used to upload the configuration and filter settings. An optional board permits use of the USB link for audio as well as an SPDIF link. In digital mode, master/slave linking is done through the SPDIF in/out connections instead of the mini jack cable.

Applications, when one module is used

Applications, when two modules are used

General features

Modules for 115V AC supply voltage

Module AS2.100 without AES/EBU input, oder no. hy-AS-2100115
EUR 249,00 excl. VAT: € 209.24 / $ 249.00 Module AS2.100d with an additional AES/EBU input, oder no. hy-AS-2100115d
EUR 259,00 excl. VAT: € 217.65 / $ 259.00

Modules are delivered without cable!

Modules for 230V AC supply voltage

Module AS2.100 without AES/EBU input, oder no. hy-AS-2100230
EUR 249,00 excl. VAT: € 209.24 / $ 249.00

Module AS2.100 with AES/EBU input, oder no. hy-AS-2100230d
EUR 259,00 excl. VAT: € 217.65 / $ 259.00

Modules are delivered without cable!

Amplifier Module PSC 400(d)

The PSC2 is a plate amp for use in powered speaker systems. As an active speaker controller, a PSC2 can form the basis of a powerful active two-way monitor. The module has two 400 Watt UcD modules implemented and is also available with a digital audio input AES/EBU, called the PSC2.400d version. The supply voltage is provided by a Switched Mode Power Supply (SMPS400) module, also a module from Hypex Electronics.

A PC controls the PSC2 through the USB port. This connection is used to upload the configuration and filter settings. It will also be possible to update the firmware through USB.

Applications, when one module is used

General features

Modules for 230Vac supply voltage (They are switchable to 115V AC)

Module PSC2.400d with AES/EBU input, oder no. hy-PSC2400d
EUR 344,00 excl. VAT: € 289.08 / $ 344.00

(Module PSC2.400 without AES/EBU input - not available)

Modules are delivered without cable!

Amplifier Module PSC 700(d)

Enlarge

The PSC2 is a plate amp for use in powered speaker systems. As an active speaker controller, a PSC2 can form the basis of a powerful active two-way monitor. The module has two 700 Watt UcD modules implemented and is also available with a digital audio input AES/EBU, called the PSC2.700d version. The supply voltage is provided by a Switched Mode Power Supply (SMPS1200) module, also a module from Hypex Electronics.

A PC controls the PSC2 through the USB port. This connection is used to upload the configuration and filter settings. It will also be possible to update the firmware through USB.

Applications, when one module is used

General features

Modules for 230Vac supply voltage (They are switchable to 115V AC)

Module PSC2.700d with AES/EBU input, oder no. hy-PSC2700d
EUR 595,00 excl. VAT: € 500.00 / $ 595.00

(Module PSC2.700 without AES/EBU input - not available)

Modules are delivered without cable!

Subwoofer modules, no longer available