Exotic-Series   Tweeter   Coaxial speaker   Mids   Woofer   Design by SEAS   Passive Radiators   no longer sold  

Seas

To our kits with Seas loudspeakers.
 


 

Tweeter

19TAF/G (H0414)       order no. seas-H0414-08       on request
19,5 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 90/220 W
  • frequency range = 4000-20000 Hz
  • resonance frequency fs = 1700 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 2,6 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 4 cm2
  • effective mechanical mass incl. air load mms = 0,23 g
  • voice coil diameter = 19,5 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 66,5 mm
  • overall diameter d = 93,8 mm
  • mounting depth (not countersunk) t = 18 mm
PDF data sheet

show kits to this chassis hide kits

19TAF/D/G (H0532)       order no. seas-H0532-08       EUR 43,70 excl. VAT: € 36.72 / $ 43.70
19,5 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 90/220 W
  • frequency range = 4000-20000 Hz
  • resonance frequency fs = 1700 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 2,6 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 4 cm2
  • effective mechanical mass incl. air load mms = 0,23 g
  • voice coil diameter = 19,5 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 66,5 mm
  • overall diameter d = 93,8 mm
  • mounting depth (not countersunk) t = 28 mm
PDF data sheet

show kits to this chassis hide kits

19TAF/D (H0561)       order no. seas-H0561-08       on request
19,5 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 90/220 W
  • frequency range = 4000-20000 Hz
  • resonance frequency fs = 1700 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 2,6 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 4 cm2
  • effective mechanical mass incl. air load mms = 0,23 g
  • voice coil diameter = 19,5 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 66,5 mm
  • overall diameter d = 93,8 mm
  • mounting depth (not countersunk) t = 18 mm
PDF data sheet

show kits to this chassis hide kits

19TFF1 (H0737)       order no. seas-H0737-08       EUR 34,60 excl. VAT: € 29.08 / $ 34.60
19,5 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 90/220 W
  • frequency range = 4000-20000 Hz
  • resonance frequency fs = 1700 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 2,6 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 4 cm2
  • effective mechanical mass incl. air load mms = 0,23 g
  • voice coil diameter = 19,5 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 66,5 mm
  • overall diameter d = 93,8 mm
  • mounting depth (not countersunk) t = 18 mm
PDF data sheet

show kits to this chassis hide kits

22TAF/G (H1283)       order no. seas-H1283-06       EUR 44,30 excl. VAT: € 37.23 / $ 44.30
19,5 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 80/180 W
  • frequency range = 2500-30000 Hz
  • resonance frequency fs = 1100 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,9 Ohm
  • force factor BL = 3,3 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 5,9 cm2
  • effective mechanical mass incl. air load mms = 0,23 g
  • voice coil diameter = 19,5 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 97,7 mm
  • mounting depth (not countersunk) t = 24 mm
PDF data sheet

show kits to this chassis hide kits

22TFF (1280)       order no. seas-H1280       EUR 39,10 excl. VAT: € 32.86 / $ 39.10
19,5 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 90/180 W
  • frequency range = 2500-20000 Hz
  • resonance frequency fs = 1050 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 4,9 Ohm
  • force factor BL = 3,3 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 5,9 cm2
  • effective mechanical mass incl. air load mms = 0,25 g
  • voice coil diameter = 19,5 mm
  • maximum peak linear excursion vibration xlin = +/- 0,2 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 97,7 mm
  • mounting depth (not countersunk) t = 24 mm
PDF data sheet

show kits to this chassis hide kits

SEAS TWS 27/6 (Ersatz für Audaphon TWS 25/6)       order no. seas-tws27-6       EUR 50,00 excl. VAT: € 42.02 / $ 50.00
26 mm dome tweeter with fabric dome.
  • power handling (continuous/programme) = 90(ab2,5kHz) W
  • frequency range = 600-24000 Hz
  • resonance frequency fs = 900 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,8 N/A
  • voice coil inductance L = 0,048 mH
  • effective piston radiating area Sd = 7,7 cm2
  • effective mechanical mass incl. air load mms = 0,28 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 75 mm
  • overall diameter d = 104 mm
  • mounting depth (not countersunk) t = 24 mm
PDF data sheet

show kits to this chassis hide kits

25TAFN/QG (H0623)       order no. seas-H0623-06       - not available
19,5 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 90/220 W
  • frequency range = 4000-20000 Hz
  • resonance frequency fs = 1700 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 2,6 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 4 cm2
  • effective mechanical mass incl. air load mms = 0,23 g
  • voice coil diameter = 19,5 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 46 mm
  • overall diameter d = 60,5 mm
  • mounting depth (not countersunk) t = 18,5 mm
PDF data sheet

show kits to this chassis hide kits

25TFFN/QG (H02625)       order no. seas-H0625-06       on request
26 mm tweeter with high quality cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 90/220 W
  • frequency range = 3000-25000 Hz
  • resonance frequency fs = 1800 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 2,45 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 46 mm
  • overall diameter d = 60,5 mm
  • mounting depth (not countersunk) t = 18,5 mm
PDF data sheet

show kits to this chassis hide kits

26TFF (H1508)       order no. seas-H1508-06       on request
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 90/220 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 1000 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91,5 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,5 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 97,7 mm
  • mounting depth (not countersunk) t = 24 mm
PDF data sheet

show kits to this chassis hide kits

27TFF (H0831)       order no. seas-H0831-06       EUR 41,10 excl. VAT: € 34.54 / $ 41.10
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 90/220 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 1200 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,5 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 24 mm
PDF data sheet

show kits to this chassis hide kits

27TFFC (H0881)       order no. seas-H0881-06       EUR 48,10 excl. VAT: € 40.42 / $ 48.10
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 80/200 W
  • frequency range = 2000-30000 Hz
  • resonance frequency fs = 550 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,6 cm2
  • effective mechanical mass incl. air load mms = 0,25 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 39 mm
PDF data sheet

show kits to this chassis hide kits

27TAFC/G (H0883)       order no. seas-H0883-06       on request
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 90/220 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 500 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,6 cm2
  • effective mechanical mass incl. air load mms = 0,32 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 39 mm
PDF data sheet

show kits to this chassis hide kits

27TF1 (H1025)       order no. seas-H1025-06       EUR 44,50 excl. VAT: € 37.39 / $ 44.50
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 60/150 W
  • frequency range = 1800-22000 Hz
  • resonance frequency fs = 900 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,8 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,6 cm2
  • effective mechanical mass incl. air load mms = 0,29 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 75 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 24 mm

show kits to this chassis hide kits

27TFD (H1096)       order no. seas-H1096-06       on request
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 60/150 W
  • frequency range = 1600-22000 Hz
  • resonance frequency fs = 650 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 4,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,6 cm2
  • effective mechanical mass incl. air load mms = 0,29 g
  • voice coil diameter = 26 mm
  • mounting diameter d = 75 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 42 mm

show kits to this chassis hide kits

27TBC/G (H1147)       order no. seas-H1147-06       EUR 52,20 excl. VAT: € 43.87 / $ 52.20
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 55/150 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 600 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7 cm2
  • effective mechanical mass incl. air load mms = 0,33 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 39 mm
PDF data sheet

show kits to this chassis hide kits

27TBC/GTV (H1148)       order no. seas-H1148-06       EUR 47,00 excl. VAT: € 39.50 / $ 47.00
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 55/150 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 900 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 2,8 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7 cm2
  • effective mechanical mass incl. air load mms = 0,33 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 28,5 mm
  • mass m = ss kg
PDF data sheet

show kits to this chassis hide kits

27TDC (H1149)       order no. seas-H1149-06       EUR 49,60 excl. VAT: € 41.68 / $ 49.60
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 55/150 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 550 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 39 mm
PDF data sheet

show kits to this chassis hide kits

27TDC/TV (H1150)       order no. seas-H1150-06       on request
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 55/150 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 800 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 89,5 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 2,8 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 28,5 mm
  • mass m = ss kg
PDF data sheet

show kits to this chassis hide kits

27TDFC (H1189)       order no. seas-H1189-06       EUR 50,20 excl. VAT: € 42.18 / $ 50.20
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 90/220 W
  • frequency range = 1500-25000 Hz
  • resonance frequency fs = 550 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,5 cm2
  • effective mechanical mass incl. air load mms = 0,37 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 39 mm
PDF data sheet

show kits to this chassis hide kits

27DFC/TV (H1210)       order no. seas-H1210-06       on request
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 90/220 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 800 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 89,5 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 2,8 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,5 cm2
  • effective mechanical mass incl. air load mms = 0,37 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,5 mm
  • mounting depth (not countersunk) t = 28,5 mm
  • mass m = ss kg
PDF data sheet

show kits to this chassis hide kits

27TDF (H1211)       order no. seas-H1211-06       on request
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 90/220 W
  • frequency range = 2500-25000 Hz
  • resonance frequency fs = 900 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,4 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,5 cm2
  • effective mechanical mass incl. air load mms = 0,37 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 24 mm
PDF data sheet

show kits to this chassis hide kits

27TBFC/G (H1212)       order no. seas-H1212-06       EUR 52,80 excl. VAT: € 44.37 / $ 52.80
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 90/220 W
  • frequency range = 1500-20000 Hz
  • resonance frequency fs = 550 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91,5 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,5 cm2
  • effective mechanical mass incl. air load mms = 0,34 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 39 mm
PDF data sheet

show kits to this chassis hide kits

27TBFC/GTV (H1213)       order no. seas-H1213-06       on request
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 90/220 W
  • frequency range = 2000-20000 Hz
  • resonance frequency fs = 750 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 90,5 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 2,8 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,5 cm2
  • effective mechanical mass incl. air load mms = 0,34 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 28,5 mm
  • mass m = ss kg
PDF data sheet

show kits to this chassis hide kits

27TBFG/G (H1214)       order no. seas-H1214-06       EUR 36,00 excl. VAT: € 30.25 / $ 36.00
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 90/220 W
  • frequency range = 2500-20000 Hz
  • resonance frequency fs = 1100 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,5 cm2
  • effective mechanical mass incl. air load mms = 0,34 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 24 mm
PDF data sheet

show kits to this chassis hide kits

27TAFNC/D (H1397)       order no. seas-H1397-04       EUR 43,70 excl. VAT: € 36.72 / $ 43.70
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 90/220 W
  • frequency range = 2500-30000 Hz
  • resonance frequency fs = 1170 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 2,7 Ohm
  • force factor BL = 1,9 N/A
  • voice coil inductance L = 0,03 mH
  • effective piston radiating area Sd = 7,5 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,45 mm
  • mounting diameter d = 46 mm
  • overall diameter d = 53 mm
  • mounting depth (not countersunk) t = 21,5 mm
PDF data sheet

show kits to this chassis hide kits

27TFFNC/CG (H1406)       order no. seas-H1406-04       on request
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 80/200 W
  • frequency range = 2500-30000 Hz
  • resonance frequency fs = 1170 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 2,7 Ohm
  • force factor BL = 1,9 N/A
  • voice coil inductance L = 0,03 mH
  • effective piston radiating area Sd = 7,5 cm2
  • effective mechanical mass incl. air load mms = 0,26 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,45 mm
  • mounting diameter d = 46 mm
  • overall diameter d = 69,7 mm
  • mounting depth (not countersunk) t = 21,5 mm
PDF data sheet

show kits to this chassis hide kits

27TTFNC/GW (H1461)       order no. seas-H1461-06       on request
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 100/230 W
  • frequency range = 2500-25000 Hz
  • resonance frequency fs = 750 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91,5 dB (2,83V; 1m)
  • DC resistance Re = 4,9 Ohm
  • force factor BL = 3,9 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7 cm2
  • effective mechanical mass incl. air load mms = 0,32 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 97,8 mm
  • mounting depth (not countersunk) t = 30,5 mm
PDF data sheet

show kits to this chassis hide kits

27TFFNC/G (H1396-04)       order no. seas-H1396-04       EUR 42,70 excl. VAT: € 35.88 / $ 42.70
26 mm tweeter with high quality cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 100/200 W
  • frequency range = 2500-30000 Hz
  • resonance frequency fs = 1170 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 2,7 Ohm
  • force factor BL = 1,9 N/A
  • voice coil inductance L = 0,03 mH
  • effective piston radiating area Sd = 7,5 cm2
  • effective mechanical mass incl. air load mms = 0,26 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,45 mm
  • mounting diameter d = 46 mm
  • overall diameter d = 53 mm
  • mounting depth (not countersunk) t = 22 mm
  • mass m = 0,10 kg
PDF data sheet

show kits to this chassis hide kits

27TDFNC/GW (H1462)       order no. seas-H1462-06       on request
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 90/220 W
  • frequency range = 2500-30000 Hz
  • resonance frequency fs = 750 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 90,5 dB (2,83V; 1m)
  • DC resistance Re = 4,9 Ohm
  • force factor BL = 3,9 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7 cm2
  • effective mechanical mass incl. air load mms = 0,31 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 97,8 mm
  • mounting depth (not countersunk) t = 30,5 mm
PDF data sheet

show kits to this chassis hide kits

27TBCD/GB-DXT (H1499)       order no. seas-H1499-06       EUR 75,40 excl. VAT: € 63.36 / $ 75.40
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 55/150 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 900 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,7 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,5 cm2
  • effective mechanical mass incl. air load mms = 0,33 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,5 mm
  • mounting depth (not countersunk) t = 59,3 mm
PDF data sheet

show kits to this chassis hide kits

29TFF/W (H1318)       order no. seas-H1318-06       EUR 55,60 excl. VAT: € 46.72 / $ 55.60
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 90/200 W
  • frequency range = 2200-25000 Hz
  • resonance frequency fs = 950 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,7 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 8 cm2
  • effective mechanical mass incl. air load mms = 0,35 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 24,5 mm
PDF data sheet

show kits to this chassis hide kits

29TAF/W (H1322)       order no. seas-H1322-06       on request
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 100/220 W
  • frequency range = 2200-25000 Hz
  • resonance frequency fs = 950 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91,5 dB (2,83V; 1m)
  • DC resistance Re = 4,7 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 8 cm2
  • effective mechanical mass incl. air load mms = 0,39 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 24,5 mm
PDF data sheet

show kits to this chassis hide kits


 

Coaxial speaker

recommended cabinet 1:
closed cabinet with 5,2 L volume
from 79/50 Hz (-3dB/-8dB)
 
recommended cabinet 2:
13,3 L volume bass reflex cabinet
with HP50 reflex tube, 22 cm long.
from 47/35 Hz (-3dB/-8dB).

T18RE/XFCTV2 (H1333)       order no. seas-H1333-08-06       EUR 143,00 excl. VAT: € 120.17 / $ 143.00
16 cm coax driver with high quality cone. The driver is magnetically shielded.
  • power handling (continuous/programme) = 80/250 W
  • frequency range = 30-25000 Hz
  • resonance frequency fs = 26 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 6,8 N/A
  • voice coil inductance L = 0,79 mH
  • effective piston radiating area Sd = 120 cm2
  • effective mechanical mass incl. air load mms = 13,7 g
  • equivalent volume of compliance Vas = 52 l
  • total Q factor Qts = 0,26 (Qms=1,63, Qes=0,31)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 145,2 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 100,5 mm
PDF data sheet

show kits to this chassis hide kits

Technische Daten Tweeter (H1333)       order no. not-available      
26 mm tweeter with high quality cone. The driver is magnetically shielded.
  • power handling (continuous/programme) = 90/220 W
  • resonance frequency fs = 1200 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 88,5 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 2,3 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 0,45 L volume
from 142/89 Hz (-3dB/-8dB)
 
recommended cabinet 2:
1,3 L volume bass reflex cabinet
with HP35 reflex tube, 35 cm long.
from 77/60 Hz (-3dB/-8dB).

L12RE/XFC (H1602)       order no. seas-H1602-04       EUR 175,10 excl. VAT: € 147.14 / $ 175.10
11 cm coax driver with high quality cone.
  • power handling (continuous/programme) = 80/250 W
  • frequency range = 60-25000 Hz
  • resonance frequency fs = 55 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 86 dB (2,83V; 1m)
  • DC resistance Re = 3,1 Ohm
  • force factor BL = 5,5 N/A
  • voice coil inductance L = 0,48 mH
  • effective piston radiating area Sd = 47 cm2
  • effective mechanical mass incl. air load mms = 9,2 g
  • equivalent volume of compliance Vas = 3 l
  • total Q factor Qts = 0,3 (Qms=2,99, Qes=0,33)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 95,8 mm
  • overall diameter d = 120 mm
  • mounting depth (not countersunk) t = 69 mm
PDF data sheet

show kits to this chassis hide kits

Technische Daten Tweeter (H1602)       order no. not-available      
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 90/220 W
  • resonance frequency fs = 1200 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 88,5 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7 cm2
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
PDF data sheet

show kits to this chassis hide kits

MR18REX/XF (H1699-08/06)       order no. seas-H1699-08-06       EUR 204,10 excl. VAT: € 171.51 / $ 204.10
16 cm coax driver with high quality cone.
  • power handling (continuous/programme) = 80/250 W
  • frequency range = 200-22000 Hz
  • resonance frequency fs = 126 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 8,3 N/A
  • voice coil inductance L = 0,16 mH
  • effective piston radiating area Sd = 126 cm2
  • effective mechanical mass incl. air load mms = 11,8 g
  • equivalent volume of compliance Vas = 3 l
  • total Q factor Qts = 0,69 (Qms=2,49, Qes=0,96)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 145,2 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 78 mm
PDF data sheet

show kits to this chassis hide kits

Technische Daten Tweeter (H1699-08/06)       order no. not-available      
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 90-220 W
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 5 Ohm
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7 cm2
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
PDF data sheet

show kits to this chassis hide kits


 

Mids

FU10RB-04 (H1600-04)       order no. seas-H1600-04       EUR 54,00 excl. VAT: € 45.38 / $ 54.00
9 cm full range driver with high quality cone.
  • power handling (continuous/programme) = 40/100 W
  • frequency range = 100-20000 Hz
  • resonance frequency fs = 102 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 85 dB (2,83V; 1m)
  • DC resistance Re = 3,3 Ohm
  • force factor BL = 2,72 N/A
  • voice coil inductance L = 0,29 mH
  • effective piston radiating area Sd = 38,5 cm2
  • effective mechanical mass incl. air load mms = 4,5 g
  • equivalent volume of compliance Vas = 1 l
  • total Q factor Qts = 0,91 (Qms=3,15, Qes=1,28)
  • voice coil diameter = 19 mm
  • maximum peak linear excursion vibration xlin = +/- 2 mm
  • mounting diameter d = 80 mm
  • overall diameter d = 98 mm
  • mounting depth (not countersunk) t = 43,6 mm
PDF data sheet

show kits to this chassis hide kits

FU10RB-08 (H1600-08)       order no. seas-H1600-08       EUR 54,00 excl. VAT: € 45.38 / $ 54.00
9 cm full range driver with high quality cone.
  • power handling (continuous/programme) = 40/100 W
  • frequency range = 100-20000 Hz
  • resonance frequency fs = 102 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 82,1 dB (2,83V; 1m)
  • DC resistance Re = 6,42 Ohm
  • force factor BL = 3,56 N/A
  • voice coil inductance L = 0,16 mH
  • effective piston radiating area Sd = 38,5 cm2
  • effective mechanical mass incl. air load mms = 4,05 g
  • equivalent volume of compliance Vas = 1 l
  • total Q factor Qts = 0,96 (Qms=3,25, Qes=1,36)
  • voice coil diameter = 19 mm
  • maximum peak linear excursion vibration xlin = +/- 2 mm
  • mounting diameter d = 80 mm
  • overall diameter d = 98 mm
  • mounting depth (not countersunk) t = 43,6 mm
PDF data sheet

show kits to this chassis hide kits

MU10RB-SL (H1658-04)       order no. seas-H1658-04       EUR 49,00 excl. VAT: € 41.18 / $ 49.00
9 cm midrange driver with high quality cone.
  • power handling (continuous/programme) = 40/100 W
  • frequency range = 100-20000 Hz
  • resonance frequency fs = 100 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 84,7 dB (2,83V; 1m)
  • DC resistance Re = 3,3 Ohm
  • force factor BL = 2,9 N/A
  • voice coil inductance L = 0,14 mH
  • effective piston radiating area Sd = 38,5 cm2
  • effective mechanical mass incl. air load mms = 4,51 g
  • equivalent volume of compliance Vas = 1,1 l
  • total Q factor Qts = 0,67 (Qms=1,63, Qes=1,15)
  • voice coil diameter = 19 mm
  • maximum peak linear excursion vibration xlin = +/- 2 mm
  • mounting diameter d = 80 mm
  • overall diameter d = 98 mm
  • mounting depth (not countersunk) t = 43,6 mm
PDF data sheet

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 4,1 L volume
from 97/61 Hz (-3dB/-8dB)
 
recommended cabinet 2:
16 L volume bass reflex cabinet
with HP50 reflex tube, 10 cm long.
from 43/38 Hz (-3dB/-8dB).

MCA12RC (H1304)       order no. seas-H1304-08       EUR 73,50 excl. VAT: € 61.76 / $ 73.50
11 cm midrange driver with high quality cone.
  • frequency range = 400-5000 Hz
  • resonance frequency fs = 68 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 4,2 N/A
  • voice coil inductance L = 0,31 mH
  • effective piston radiating area Sd = 55 cm2
  • effective mechanical mass incl. air load mms = 4,58 g
  • equivalent volume of compliance Vas = 5 l
  • total Q factor Qts = 0,57 (Qms=2,42, Qes=0,74)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,9 mm
  • mounting diameter d = 95,8 mm
  • overall diameter d = 120,4 mm
  • mounting depth (not countersunk) t = 55,5 mm
PDF data sheet

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 1,1 L volume
from 162/102 Hz (-3dB/-8dB)
 
recommended cabinet 2:
2,7 L volume bass reflex cabinet
with HP35 reflex tube, 12 cm long.
from 96/72 Hz (-3dB/-8dB).

MCA15RCY (H1262)       order no. seas-H1262-08       EUR 87,60 excl. VAT: € 73.61 / $ 87.60
13 cm midrange driver with high quality cone.
  • frequency range = 100-4000 Hz
  • resonance frequency fs = 51 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89,5 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • force factor BL = 6,8 N/A
  • voice coil inductance L = 0,73 mH
  • effective piston radiating area Sd = 80 cm2
  • effective mechanical mass incl. air load mms = 7,1 g
  • equivalent volume of compliance Vas = 12 l
  • total Q factor Qts = 0,25 (Qms=1,57, Qes=0,3)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 1,7 mm
  • mounting diameter d = 112 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 67,5 mm
PDF data sheet

show kits to this chassis hide kits


 

Woofer


open a bigger photo

recommended cabinet 1:
closed cabinet with 0,74 L volume
from 147/93 Hz (-3dB/-8dB)
 
recommended cabinet 2:
2,2 L volume bass reflex cabinet
with HP35 reflex tube, 19 cm long.
from 80/62 Hz (-3dB/-8dB).

CA12RCY (H1152)       order no. seas-H1152-08       EUR 69,80 excl. VAT: € 58.66 / $ 69.80
11 cm bass driver with paper cone.
  • power handling (continuous/programme) = 60/200 W
  • frequency range = 45-5000 Hz
  • resonance frequency fs = 57 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86 dB (2,83V; 1m)
  • DC resistance Re = 6,4 Ohm
  • force factor BL = 6,35 N/A
  • voice coil inductance L = 1,05 mH
  • effective piston radiating area Sd = 55 cm2
  • effective mechanical mass incl. air load mms = 6,1 g
  • equivalent volume of compliance Vas = 5 l
  • total Q factor Qts = 0,31 (Qms=2,17, Qes=0,36)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 95,8 mm
  • overall diameter d = 120,4 mm
  • mounting depth (not countersunk) t = 58,5 mm
PDF data sheet

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 0,64 L volume
from 137/87 Hz (-3dB/-8dB)
 
recommended cabinet 2:
1,8 L volume bass reflex cabinet
with HP35 reflex tube, 28 cm long.
from 77/59 Hz (-3dB/-8dB).

L12RCY/P (H1207)       order no. seas-H1207-08       EUR 74,60 excl. VAT: € 62.69 / $ 74.60
$dd cm bass driver with aluminium cone.
  • power handling (continuous/programme) = 70/200 W
  • frequency range = 55-3500 Hz
  • resonance frequency fs = 50 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 85,5 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 6,1 N/A
  • voice coil inductance L = 0,76 mH
  • effective piston radiating area Sd = 50 cm2
  • effective mechanical mass incl. air load mms = 6,8 g
  • equivalent volume of compliance Vas = 5 l
  • total Q factor Qts = 0,29 (Qms=2,34, Qes=0,33)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 95.6 mm
  • overall diameter d = 120,4 mm
  • mounting depth (not countersunk) t = 58,5 mm
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 2,4 L volume
from 110/69 Hz (-3dB/-8dB)
 
recommended cabinet 2:
7,5 L volume bass reflex cabinet
with HP35 reflex tube, 9 cm long.
from 59/46 Hz (-3dB/-8dB).

ER15RLY (H1455)       order no. seas-H1455-08       EUR 78,70 excl. VAT: € 66.13 / $ 78.70
13 cm bass driver with paper cone.
  • power handling (continuous/programme) = 60/250 W
  • frequency range = 50-4000 Hz
  • resonance frequency fs = 44 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87,5 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 5,5 N/A
  • voice coil inductance L = 0,73 mH
  • effective piston radiating area Sd = 80 cm2
  • effective mechanical mass incl. air load mms = 7,6 g
  • equivalent volume of compliance Vas = 15 l
  • total Q factor Qts = 0,32 (Qms=1,55, Qes=0,41)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 112 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 67,5 mm
PDF data sheet

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 2,5 L volume
from 98/62 Hz (-3dB/-8dB)
 
recommended cabinet 2:
8,8 L volume bass reflex cabinet
with HP35 reflex tube, 10 cm long.
from 51/40 Hz (-3dB/-8dB).

L15RLY/P (H1141)       order no. seas-H1141-08       EUR 87,20 excl. VAT: € 73.28 / $ 87.20
13 cm bass driver with aluminium cone.
  • power handling (continuous/programme) = 80/200 W
  • frequency range = 45-3000 Hz
  • resonance frequency fs = 44 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 5,7 N/A
  • voice coil inductance L = 0,84 mH
  • effective piston radiating area Sd = 75 cm2
  • effective mechanical mass incl. air load mms = 8,1 g
  • equivalent volume of compliance Vas = 12 l
  • total Q factor Qts = 0,36 (Qms=2,1, Qes=0,43)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 112 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 67,5 mm
PDF data sheet

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 2,6 L volume
from 104/65 Hz (-3dB/-8dB)
 
recommended cabinet 2:
8,5 L volume bass reflex cabinet
with HP50 reflex tube, 20 cm long.
from 55/43 Hz (-3dB/-8dB).

CA15RLY (H1216)       order no. seas-H1216-08       EUR 87,90 excl. VAT: € 73.87 / $ 87.90
13 cm bass driver with paper cone.
  • power handling (continuous/programme) = 60/250 W
  • frequency range = 50-4000 Hz
  • resonance frequency fs = 44 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87,5 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 5,5 N/A
  • voice coil inductance L = 0,82 mH
  • effective piston radiating area Sd = 80 cm2
  • effective mechanical mass incl. air load mms = 7,7 g
  • equivalent volume of compliance Vas = 14 l
  • total Q factor Qts = 0,34 (Qms=1,88, Qes=0,42)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 112 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 67,5 mm
PDF data sheet

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 2,9 L volume
from 87/55 Hz (-3dB/-8dB)
 
recommended cabinet 2:
9,7 L volume bass reflex cabinet
with HP35 reflex tube, 11 cm long.
from 46/36 Hz (-3dB/-8dB).

L16RNX (H1488-04)       order no. seas-H1488-04       EUR 111,30 excl. VAT: € 93.53 / $ 111.30
13 cm bass driver with aluminium cone.
  • power handling (continuous/programme) = 80/250 W
  • frequency range = 45-2000 Hz
  • resonance frequency fs = 37 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 3,1 Ohm
  • force factor BL = 5,4 N/A
  • voice coil inductance L = 0,32 mH
  • effective piston radiating area Sd = 104 cm2
  • effective mechanical mass incl. air load mms = 14,7 g
  • equivalent volume of compliance Vas = 16 l
  • total Q factor Qts = 0,33 (Qms=2,31, Qes=0,38)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 126 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 70,5 mm
PDF data sheet

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 3,4 L volume
from 87/55 Hz (-3dB/-8dB)
 
recommended cabinet 2:
11,7 L volume bass reflex cabinet
with HP50 reflex tube, 20 cm long.
from 45/35 Hz (-3dB/-8dB).

L16RNX (H1488-08)       order no. seas-H1488-08       EUR 111,30 excl. VAT: € 93.53 / $ 111.30
13 cm bass driver with aluminium cone.
  • power handling (continuous/programme) = 80/250 W
  • frequency range = 45-2000 Hz
  • resonance frequency fs = 39 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 85 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • force factor BL = 7,2 N/A
  • voice coil inductance L = 0,48 mH
  • effective piston radiating area Sd = 104 cm2
  • effective mechanical mass incl. air load mms = 15,3 g
  • equivalent volume of compliance Vas = 16 l
  • total Q factor Qts = 0,36 (Qms=2,08, Qes=0,44)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 126 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 70,5 mm
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 7,2 L volume
from 66/42 Hz (-3dB/-8dB)
 
recommended cabinet 2:
29 L volume bass reflex cabinet
with HP50 reflex tube, 13 cm long.
from 32/26 Hz (-3dB/-8dB).

L16RN/SL (H1480)       order no. seas-H1480-08       EUR 102,50 excl. VAT: € 86.13 / $ 102.50
13 cm bass driver with aluminium cone.
  • power handling (continuous/programme) = 80/250 W
  • frequency range = 45-2000 Hz
  • resonance frequency fs = 37 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 84 dB (2,83V; 1m)
  • DC resistance Re = 6 Ohm
  • force factor BL = 6,1 N/A
  • voice coil inductance L = 0,64 mH
  • effective piston radiating area Sd = 104 cm2
  • effective mechanical mass incl. air load mms = 14,7 g
  • equivalent volume of compliance Vas = 19 l
  • total Q factor Qts = 0,45 (Qms=2,48, Qes=0,55)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 126 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 65,5 mm
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 4 L volume
from 90/57 Hz (-3dB/-8dB)
 
recommended cabinet 2:
12,5 L volume bass reflex cabinet
with HP50 reflex tube, 17 cm long.
from 48/38 Hz (-3dB/-8dB).

U16RCY/P (H1520)       order no. seas-H1520-08       EUR 97,60 excl. VAT: € 82.02 / $ 97.60
13 cm bass driver with paper cone.
  • power handling (continuous/programme) = 60/250 W
  • frequency range = 45-3000 Hz
  • resonance frequency fs = 36 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 6,3 N/A
  • voice coil inductance L = 0,81 mH
  • effective piston radiating area Sd = 99 cm2
  • effective mechanical mass incl. air load mms = 10,26 g
  • equivalent volume of compliance Vas = 25 l
  • total Q factor Qts = 0,32 (Qms=2,19, Qes=0,38)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 126 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 65,5 mm
PDF data sheet

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 5,6 L volume
from 85/54 Hz (-3dB/-8dB)
 
recommended cabinet 2:
17 L volume bass reflex cabinet
with HP50 reflex tube, 14 cm long.
from 46/36 Hz (-3dB/-8dB).

L18RDY/P (H1085)       order no. seas-H1085-08       EUR 89,40 excl. VAT: € 75.13 / $ 89.40
16 cm bass driver with aluminium cone.
  • power handling (continuous/programme) = 80/250 W
  • frequency range = 35-2500 Hz
  • resonance frequency fs = 33 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 6,5 N/A
  • voice coil inductance L = 0,92 mH
  • effective piston radiating area Sd = 125 cm2
  • effective mechanical mass incl. air load mms = 12,7 g
  • equivalent volume of compliance Vas = 38 l
  • total Q factor Qts = 0,31 (Qms=2,01, Qes=0,37)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 145,2 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 73 mm
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 5 L volume
from 93/59 Hz (-3dB/-8dB)
 
recommended cabinet 2:
18 L volume bass reflex cabinet
with HP70 reflex tube, 22 cm long.
from 48/38 Hz (-3dB/-8dB).

U18RNX/P (H1571)       order no. seas-H1571-08       EUR 118,00 excl. VAT: € 99.16 / $ 118.00
16 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 250 W
  • frequency range = 30-4000 Hz
  • resonance frequency fs = 43 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 5,9 Ohm
  • force factor BL = 6,9 N/A
  • voice coil inductance L = 0,25 mH
  • effective piston radiating area Sd = 126 cm2
  • effective mechanical mass incl. air load mms = 13,4 g
  • equivalent volume of compliance Vas = 22 l
  • total Q factor Qts = 0,37 (Qms=2,05, Qes=0,45)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 145,2 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 83,2 mm
  • mass m = 1,9 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 4,9 L volume
from 90/57 Hz (-3dB/-8dB)
 
recommended cabinet 2:
14,8 L volume bass reflex cabinet
with HP50 reflex tube, 14 cm long.
from 49/38 Hz (-3dB/-8dB).

CA18RNX (H1215)       order no. seas-H1215-08       EUR 90,40 excl. VAT: € 75.97 / $ 90.40
16 cm bass driver with paper cone.
  • power handling (continuous/programme) = 80/250 W
  • frequency range = 45-3000 Hz
  • resonance frequency fs = 35 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88,5 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • force factor BL = 7,2 N/A
  • voice coil inductance L = 1,2 mH
  • effective piston radiating area Sd = 136 cm2
  • effective mechanical mass incl. air load mms = 14 g
  • equivalent volume of compliance Vas = 33 l
  • total Q factor Qts = 0,31 (Qms=1,9, Qes=0,37)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 145,2 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 78 mm
PDF data sheet

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 13,7 L volume
from 72/46 Hz (-3dB/-8dB)
 
recommended cabinet 2:
56 L volume bass reflex cabinet
with HP70 reflex tube, 9 cm long.
from 34/28 Hz (-3dB/-8dB).

CA18RLY (H1217)       order no. seas-H1217-08       EUR 82,50 excl. VAT: € 69.33 / $ 82.50
16 cm bass driver with paper cone.
  • power handling (continuous/programme) = 80/250 W
  • frequency range = 35-3000 Hz
  • resonance frequency fs = 42 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • force factor BL = 5,6 N/A
  • voice coil inductance L = 1,05 mH
  • effective piston radiating area Sd = 136 cm2
  • effective mechanical mass incl. air load mms = 10,6 g
  • equivalent volume of compliance Vas = 32 l
  • total Q factor Qts = 0,47 (Qms=2,92, Qes=0,56)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 145,2 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 73 mm
PDF data sheet

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 4,5 L volume
from 93/58 Hz (-3dB/-8dB)
 
recommended cabinet 2:
13,5 L volume bass reflex cabinet
with HP50 reflex tube, 15 cm long.
from 51/39 Hz (-3dB/-8dB).

L18RNX/P (H1224)       order no. seas-H1224-08       EUR 95,50 excl. VAT: € 80.25 / $ 95.50
16 cm bass driver with aluminium cone.
  • power handling (continuous/programme) = 100/250 W
  • frequency range = 40-2500 Hz
  • resonance frequency fs = 36 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • force factor BL = 7,2 N/A
  • voice coil inductance L = 1,06 mH
  • effective piston radiating area Sd = 126 cm2
  • effective mechanical mass incl. air load mms = 13,6 g
  • equivalent volume of compliance Vas = 30 l
  • total Q factor Qts = 0,31 (Qms=2,09, Qes=0,36)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 145,2 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 78 mm
PDF data sheet

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 4,7 L volume
from 95/60 Hz (-3dB/-8dB)
 
recommended cabinet 2:
14,4 L volume bass reflex cabinet
with HP50 reflex tube, 13 cm long.
from 52/40 Hz (-3dB/-8dB).

ER18RNX (H1456)       order no. seas-H1456-08       EUR 96,70 excl. VAT: € 81.26 / $ 96.70
16 cm bass driver with paper cone.
  • power handling (continuous/programme) = 80/250 W
  • frequency range = 45-3000 Hz
  • resonance frequency fs = 37 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88,5 dB (2,83V; 1m)
  • DC resistance Re = 5,9 Ohm
  • force factor BL = 7,2 N/A
  • voice coil inductance L = 0,67 mH
  • effective piston radiating area Sd = 136 cm2
  • effective mechanical mass incl. air load mms = 14 g
  • equivalent volume of compliance Vas = 32 l
  • total Q factor Qts = 0,31 (Qms=1,58, Qes=0,39)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 145,2 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 78 mm
PDF data sheet

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 9,1 L volume
from 66/42 Hz (-3dB/-8dB)
 
recommended cabinet 2:
21 L volume bass reflex cabinet
with HP70 reflex tube, 40 cm long.
from 40/30 Hz (-3dB/-8dB).

CD22RN4X (H1192)       order no. seas-H1192-08       EUR 128,90 excl. VAT: € 108.32 / $ 128.90
20 cm bass driver with paper cone.
  • power handling (continuous/programme) = 100/250 W
  • frequency range = 20-2500 Hz
  • resonance frequency fs = 20 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 11,4 N/A
  • voice coil inductance L = 3,47 mH
  • effective piston radiating area Sd = 230 cm2
  • effective mechanical mass incl. air load mms = 41,6 g
  • equivalent volume of compliance Vas = 108 l
  • total Q factor Qts = 0,24 (Qms=3,28, Qes=0,26)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 186,4 mm
  • overall diameter d = 220,6 mm
  • mounting depth (not countersunk) t = 90 mm
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 9,3 L volume
from 64/40 Hz (-3dB/-8dB)
 
recommended cabinet 2:
24 L volume bass reflex cabinet
with HP70 reflex tube, 38 cm long.
from 38/28 Hz (-3dB/-8dB).

L22RN4X/P (H1208)       order no. seas-H1208-08       EUR 113,20 excl. VAT: € 95.13 / $ 113.20
20 cm bass driver with aluminium cone.
  • power handling (continuous/programme) = 125/300 W
  • frequency range = 20-1000 Hz
  • resonance frequency fs = 21 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86,5 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 10,7 N/A
  • voice coil inductance L = 3,76 mH
  • effective piston radiating area Sd = 220 cm2
  • effective mechanical mass incl. air load mms = 40 g
  • equivalent volume of compliance Vas = 93 l
  • total Q factor Qts = 0,27 (Qms=3,13, Qes=0,29)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 186,4 mm
  • overall diameter d = 220,6 mm
  • mounting depth (not countersunk) t = 90 mm
PDF data sheet

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 18 L volume
from 57/36 Hz (-3dB/-8dB)
 
recommended cabinet 2:
56 L volume bass reflex cabinet
with HP70 reflex tube, 17 cm long.
from 31/24 Hz (-3dB/-8dB).

L22RNX/P (H1252)       order no. seas-H1252-08       EUR 106,40 excl. VAT: € 89.41 / $ 106.40
20 cm bass driver with aluminium cone.
  • power handling (continuous/programme) = 110/300 W
  • frequency range = 25-2000 Hz
  • resonance frequency fs = 23 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 6 Ohm
  • force factor BL = 8,15 N/A
  • voice coil inductance L = 1,43 mH
  • effective piston radiating area Sd = 220 cm2
  • effective mechanical mass incl. air load mms = 27 g
  • equivalent volume of compliance Vas = 112 l
  • total Q factor Qts = 0,32 (Qms=2,07, Qes=0,38)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 186,4 mm
  • overall diameter d = 220,6 mm
  • mounting depth (not countersunk) t = 90 mm
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 30 L volume
from 56/35 Hz (-3dB/-8dB)
 
recommended cabinet 2:
117 L volume bass reflex cabinet
with HP100 reflex tube, 17 cm long.
from 27/22 Hz (-3dB/-8dB).

CA22RNX (H1288)       order no. seas-H1288-08       EUR 102,40 excl. VAT: € 86.05 / $ 102.40
20 cm bass driver with paper cone.
  • power handling (continuous/programme) = 80/250 W
  • frequency range = 30-3000 Hz
  • resonance frequency fs = 29 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89,5 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 7 N/A
  • voice coil inductance L = 1 mH
  • effective piston radiating area Sd = 230 cm2
  • effective mechanical mass incl. air load mms = 20,9 g
  • equivalent volume of compliance Vas = 97 l
  • total Q factor Qts = 0,41 (Qms=2,04, Qes=0,52)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 186,4 mm
  • overall diameter d = 220,6 mm
  • mounting depth (not countersunk) t = 90 mm
PDF data sheet

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 11,3 L volume
from 90/57 Hz (-3dB/-8dB)
 
recommended cabinet 2:
33 L volume bass reflex cabinet
with HP100 reflex tube, 26 cm long.
from 50/38 Hz (-3dB/-8dB).

CA22RNY (H1471)       order no. seas-H1471-08       EUR 126,60 excl. VAT: € 106.39 / $ 126.60
20 cm bass driver with paper cone.
  • power handling (continuous/programme) = 90/250 W
  • frequency range = 35-2500 Hz
  • resonance frequency fs = 34 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 8,5 N/A
  • voice coil inductance L = 1,55 mH
  • effective piston radiating area Sd = 230 cm2
  • effective mechanical mass incl. air load mms = 17,8 g
  • equivalent volume of compliance Vas = 82 l
  • total Q factor Qts = 0,3 (Qms=1,69, Qes=0,36)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 186,4 mm
  • overall diameter d = 220,6 mm
  • mounting depth (not countersunk) t = 97 mm
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 12,2 L volume
from 82/52 Hz (-3dB/-8dB)
 
recommended cabinet 2:
33 L volume bass reflex cabinet
with HP70 reflex tube, 13 cm long.
from 47/36 Hz (-3dB/-8dB).

U22REX/P-SL (H1659-08)       order no. seas-H1659-08       EUR 152,90 excl. VAT: € 128.49 / $ 152.90
20 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 100/250 W
  • frequency range = 29-4000 Hz
  • resonance frequency fs = 29 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 90,5 dB (2,83V; 1m)
  • DC resistance Re = 6 Ohm
  • force factor BL = 8 N/A
  • voice coil inductance L = 0,7 mH
  • effective piston radiating area Sd = 220 cm2
  • effective mechanical mass incl. air load mms = 19,8 g
  • equivalent volume of compliance Vas = 103 l
  • total Q factor Qts = 0,29 (Qms=1,77, Qes=0,34)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 186,4 mm
  • overall diameter d = 220,6 mm
  • mounting depth (not countersunk) t = 90 mm
PDF data sheet

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 29 L volume
from 48/31 Hz (-3dB/-8dB)
 
recommended cabinet 2:
94 L volume bass reflex cabinet
with HP100 reflex tube, 33 cm long.
from 26/20 Hz (-3dB/-8dB).

L26RFX/P (H1209)       order no. seas-H1209-08       EUR 191,10 excl. VAT: € 160.59 / $ 191.10
25 cm bass driver with aluminium cone.
  • power handling (continuous/programme) = 125/300 W
  • frequency range = 20-1000 Hz
  • resonance frequency fs = 20 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 10,7 N/A
  • voice coil inductance L = 1,83 mH
  • effective piston radiating area Sd = 330 cm2
  • effective mechanical mass incl. air load mms = 53 g
  • equivalent volume of compliance Vas = 171 l
  • total Q factor Qts = 0,33 (Qms=2,15, Qes=0,39)
  • voice coil diameter = 51 mm
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 232,2 mm
  • overall diameter d = 269 mm
  • mounting depth (not countersunk) t = 107,5 mm
PDF data sheet

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 24 L volume
from 68/43 Hz (-3dB/-8dB)
 
recommended cabinet 2:
78 L volume bass reflex cabinet
with HP100 reflex tube, 17 cm long.
from 36/28 Hz (-3dB/-8dB).

CA26RFX (H1305)       order no. seas-H1305-08       EUR 176,40 excl. VAT: € 148.24 / $ 176.40
25 cm bass driver with paper cone.
  • power handling (continuous/programme) = 100/300 W
  • frequency range = 30-1000 Hz
  • resonance frequency fs = 29 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 90,5 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 10,7 N/A
  • voice coil inductance L = 1,95 mH
  • effective piston radiating area Sd = 350 cm2
  • effective mechanical mass incl. air load mms = 36,1 g
  • equivalent volume of compliance Vas = 129 l
  • total Q factor Qts = 0,34 (Qms=2,14, Qes=0,4)
  • voice coil diameter = 51 mm
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 232,2 mm
  • overall diameter d = 269 mm
  • mounting depth (not countersunk) t = 107,5 mm
PDF data sheet

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 19 L volume
from 71/45 Hz (-3dB/-8dB)
 
recommended cabinet 2:
53 L volume bass reflex cabinet
with HP100 reflex tube, 27 cm long.
from 40/31 Hz (-3dB/-8dB).

CA26RE4X (H1316)       order no. seas-H1316-08       EUR 169,00 excl. VAT: € 142.02 / $ 169.00
25 cm bass driver with paper cone.
  • power handling (continuous/programme) = 80/300 W
  • frequency range = 30-1500 Hz
  • resonance frequency fs = 25 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 11,6 N/A
  • voice coil inductance L = 3,08 mH
  • effective piston radiating area Sd = 350 cm2
  • effective mechanical mass incl. air load mms = 38,5 g
  • equivalent volume of compliance Vas = 164 l
  • total Q factor Qts = 0,28 (Qms=3,99, Qes=0,3)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 232,2 mm
  • overall diameter d = 269 mm
  • mounting depth (not countersunk) t = 100,5 mm
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 44 L volume
from 51/33 Hz (-3dB/-8dB)
 
recommended cabinet 2:
160 L volume bass reflex cabinet
with HP100 reflex tube, 14 cm long.
from 26/21 Hz (-3dB/-8dB).

A26RE4 (H1411-08)       order no. seas-H1411-08       EUR 159,80 excl. VAT: € 134.29 / $ 159.80
25 cm bass driver with paper cone.
  • power handling (continuous/programme) = 80/300 W
  • frequency range = 20-1500 Hz
  • resonance frequency fs = 25 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 9,7 N/A
  • voice coil inductance L = 3,8 mH
  • effective piston radiating area Sd = 350 cm2
  • effective mechanical mass incl. air load mms = 37,4 g
  • equivalent volume of compliance Vas = 169 l
  • total Q factor Qts = 0,39 (Qms=3,84, Qes=0,43)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 232 mm
  • overall diameter d = 269 mm
  • mounting depth (not countersunk) t = 100,5 mm
PDF data sheet

show kits to this chassis hide kits


 

Design by SEAS


open a bigger photo

recommended cabinet 1:
closed cabinet with 13,9 L volume
from 55/35 Hz (-3dB/-8dB)
 
recommended cabinet 2:
43 L volume bass reflex cabinet
with HP70 reflex tube, 26 cm long.
from 30/23 Hz (-3dB/-8dB).

L26ROY (D1001-04S)       order no. seas-D1001-04S       EUR 242,00 excl. VAT: € 203.36 / $ 242.00
25 cm bass driver with aluminium cone.
  • power handling (continuous/programme) = 250/500 W
  • frequency range = 20-1000 Hz
  • resonance frequency fs = 22 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 3,1 Ohm
  • force factor BL = 12 N/A
  • voice coil inductance L = 0,53 mH
  • effective piston radiating area Sd = 363 cm2
  • effective mechanical mass incl. air load mms = 107 g
  • equivalent volume of compliance Vas = 87 l
  • total Q factor Qts = 0,31 (Qms=4,14, Qes=0,33)
  • voice coil diameter = 56 mm
  • maximum peak linear excursion vibration xlin = +/- 14 mm
  • mounting diameter d = 237 mm
  • overall diameter d = 269 mm
  • mounting depth (not countersunk) t = 141 mm
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 5 L volume
from 71/45 Hz (-3dB/-8dB)
 
recommended cabinet 2:
13,3 L volume bass reflex cabinet
with HP70 reflex tube, 57 cm long.
from 41/31 Hz (-3dB/-8dB).

L26RO4Y (D1004-04S)       order no. seas-D1004-04S       EUR 242,00 excl. VAT: € 203.36 / $ 242.00
25 cm bass driver with aluminium cone.
  • power handling (continuous/programme) = 250/500 W
  • frequency range = 20-1000 Hz
  • resonance frequency fs = 24 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 85,5 dB (2,83V; 1m)
  • DC resistance Re = 3,3 Ohm
  • force factor BL = 18 N/A
  • voice coil inductance L = 3,85 mH
  • effective piston radiating area Sd = 363 cm2
  • effective mechanical mass incl. air load mms = 173 g
  • equivalent volume of compliance Vas = 46 l
  • total Q factor Qts = 0,26 (Qms=4,9, Qes=0,28)
  • voice coil diameter = 56 mm
  • maximum peak linear excursion vibration xlin = +/- 14 mm
  • mounting diameter d = 237 mm
  • overall diameter d = 269 mm
  • mounting depth (not countersunk) t = 141 mm
PDF data sheet

show kits to this chassis hide kits

SL26R (D1003)       order no. seas-D1003       EUR 135,20 excl. VAT: € 113.61 / $ 135.20
25 cm passive radiator.
  • resonance frequency fs = 16 Hz
  • effective piston radiating area Sd = 363 cm2
  • effective mechanical mass incl. air load mms = 260 g
  • equivalent volume of compliance Vas = 93 l
  • maximum peak linear excursion vibration xlin = +/- 28 mm
  • mounting diameter d = 237 mm
  • overall diameter d = 269 mm
  • mounting depth (not countersunk) t = 76 mm
PDF data sheet

show kits to this chassis hide kits


 

Passive Radiators

SP18R (H9944)       order no. seas-H9944       EUR 69,50 excl. VAT: € 58.40 / $ 69.50
16 cm bass driver with high quality cone.
  • resonance frequency fs = 26 Hz
  • effective piston radiating area Sd = 130 cm2
  • effective mechanical mass incl. air load mms = 21,5 g
  • equivalent volume of compliance Vas = 41 l
  • maximum peak linear excursion vibration xlin = +/- 9,5 mm
  • mounting diameter d = 145,2 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 44 mm
PDF data sheet

show kits to this chassis hide kits

SP22R (H9945)       order no. seas-H9945       EUR 69,40 excl. VAT: € 58.32 / $ 69.40
20 cm bass driver with high quality cone.
  • resonance frequency fs = 22 Hz
  • effective piston radiating area Sd = 230 cm2
  • effective mechanical mass incl. air load mms = 28 g
  • equivalent volume of compliance Vas = 138 l
  • maximum peak linear excursion vibration xlin = +/- 10 mm
  • mounting diameter d = 186,4 mm
  • overall diameter d = 220,6 mm
  • mounting depth (not countersunk) t = 56 mm
PDF data sheet

show kits to this chassis hide kits

SP26R (H9946)       order no. seas-H9946       EUR 117,80 excl. VAT: € 98.99 / $ 117.80
25 cm bass driver with high quality cone.
  • resonance frequency fs = 22 Hz
  • effective piston radiating area Sd = 350 cm2
  • effective mechanical mass incl. air load mms = 42 g
  • equivalent volume of compliance Vas = 214 l
  • maximum peak linear excursion vibration xlin = +/- 12,5 mm
  • mounting diameter d = 232,2 mm
  • overall diameter d = 269 mm
  • mounting depth (not countersunk) t = 65,5 mm
PDF data sheet

show kits to this chassis hide kits


 

Full Range


open a bigger photo

recommended cabinet 1:
closed cabinet with 26 L volume
from 69/43 Hz (-3dB/-8dB)
 
recommended cabinet 2:
89 L volume bass reflex cabinet
with HP100 reflex tube, 14 cm long.
from 36/28 Hz (-3dB/-8dB).

FA22RCZ       order no. seas-H1597-08       EUR 142,70 excl. VAT: € 119.92 / $ 142.70
20 cm full range driver with paper cone.
  • power handling (continuous/programme) = 40/110 W
  • frequency range = 30-20000 Hz
  • resonance frequency fs = 30 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 94 dB (2,83V; 1m)
  • DC resistance Re = 5,7 Ohm
  • force factor BL = 6,4 N/A
  • voice coil inductance L = 0,09 mH
  • effective piston radiating area Sd = 222 cm2
  • effective mechanical mass incl. air load mms = 12,6 g
  • equivalent volume of compliance Vas = 134 l
  • total Q factor Qts = 0,35 (Qms=4,36, Qes=0,38)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 186 mm
  • overall diameter d = 220 mm
  • mounting depth (not countersunk) t = 85 mm
PDF data sheet

show kits to this chassis hide kits


 

no longer sold

KT25 F (H457)       order no. I-6565       on request
26 mm tweeter with fabric cone.
  • power handling (continuous/programme) = 120/160 W
  • frequency range = 3000-25000 Hz
  • resonance frequency fs = 1400 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • voice coil diameter = 26 mm
  • mounting diameter d = 75 mm
  • overall diameter d = 104 mm
  • mounting depth (not countersunk) t = 28 mm

show kits to this chassis hide kits

KTN25 F (H615)       order no. I-6567       EUR 36,20 excl. VAT: € 30.42 / $ 36.20
26 mm tweeter with fabric cone.
  • power handling (continuous/programme) = 120/160 W
  • frequency range = 3000-25000 Hz
  • resonance frequency fs = 1800 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • voice coil diameter = 26 mm
  • mounting diameter d = 46 mm
  • overall diameter d = 48 mm
  • mounting depth (not countersunk) t = 14 mm

show kits to this chassis hide kits

KT26 F (H0519)       order no. I-6568       - not available
26 mm tweeter with fabric cone.
  • power handling (continuous/programme) = 80/200 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 1100 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • voice coil diameter = 26 mm
  • mounting diameter d = 75 mm
  • overall diameter d = 104 mm
  • mounting depth (not countersunk) t = 42 mm

show kits to this chassis hide kits

KT27 F (H831)       order no. I-6559       EUR 32,00 excl. VAT: € 26.89 / $ 32.00
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 90/220 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 1200 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,5 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 24 mm
PDF data sheet

show kits to this chassis hide kits

KT28 F (H881)       order no. I-6555       EUR 39,00 excl. VAT: € 32.77 / $ 39.00
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 80/200 W
  • frequency range = 2000-30000 Hz
  • resonance frequency fs = 550 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,6 cm2
  • effective mechanical mass incl. air load mms = 0,25 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 39 mm
PDF data sheet

show kits to this chassis hide kits

Noferro 12 (H1069)       order no. I-6737       - not available
19 mm tweeter with fabric cone.
  • power handling (continuous/programme) = 40/60 W
  • frequency range = 2500-22000 Hz
  • resonance frequency fs = 1200 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 2,8 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 4 cm2
  • effective mechanical mass incl. air load mms = 0,17 g
  • voice coil diameter = 19 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 67 mm
  • overall diameter d = 94 mm
  • mounting depth (not countersunk) t = 24 mm

show kits to this chassis hide kits

Noferro 550 (H1149)       order no. I-1381008       EUR 41,00 excl. VAT: € 34.45 / $ 41.00
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 55/150 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 550 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 39 mm
PDF data sheet

show kits to this chassis hide kits

Noferro 600G (H1147)       order no. I-1381006       EUR 41,00 excl. VAT: € 34.45 / $ 41.00
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 55/150 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 600 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7 cm2
  • effective mechanical mass incl. air load mms = 0,33 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 39 mm
PDF data sheet

show kits to this chassis hide kits

Noferro 650 (H1096)       order no. I-6739       on request
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 60/150 W
  • frequency range = 1600-22000 Hz
  • resonance frequency fs = 650 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 4,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,6 cm2
  • effective mechanical mass incl. air load mms = 0,29 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 75 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 42 mm

show kits to this chassis hide kits

Noferro 800/TV (H1150)       order no. I-1381009       on request
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 55/150 W
  • frequency range = 200-25000 Hz
  • resonance frequency fs = 800 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 89,5 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 2,8 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 28,5 mm
  • mass m = ss kg
PDF data sheet

show kits to this chassis hide kits

Noferro 900 (H1025)       order no. I-6724       EUR 44,50 excl. VAT: € 37.39 / $ 44.50
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 60/150 W
  • frequency range = 1800-22000 Hz
  • resonance frequency fs = 900 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,8 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,6 cm2
  • effective mechanical mass incl. air load mms = 0,29 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 75 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 24 mm

show kits to this chassis hide kits

Noferro 900 G/TV (H1148)       order no. I-1381007       EUR 45,00 excl. VAT: € 37.82 / $ 45.00
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 55/150 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 900 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 2,8 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7 cm2
  • effective mechanical mass incl. air load mms = 0,33 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 28,5 mm
  • mass m = ss kg
PDF data sheet

show kits to this chassis hide kits

TAF 27plus (H883)       order no. I-6720       on request
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 90/220 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 500 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7,6 cm2
  • effective mechanical mass incl. air load mms = 0,32 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 103,8 mm
  • mounting depth (not countersunk) t = 39 mm
PDF data sheet

show kits to this chassis hide kits

K29 FD (H587)       order no. I-6562       - not available
26 mm tweeter with metal cone.
  • power handling (continuous/programme) = 90/220 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 1400 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • effective piston radiating area Sd = 7 cm2
  • voice coil diameter = 26 mm
  • mounting diameter d = 75 mm
  • overall diameter d = 104 mm
  • mounting depth (not countersunk) t = 28 mm

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 0,64 L volume
from 137/87 Hz (-3dB/-8dB)
 
recommended cabinet 2:
1,8 L volume bass reflex cabinet
with HP35 reflex tube, 28 cm long.
from 77/59 Hz (-3dB/-8dB).

W121 AL (H1207)       order no. I-1381012       - not available (_)
$dd cm bass driver with aluminium cone.
  • power handling (continuous/programme) = 70/200 W
  • frequency range = 55-3500 Hz
  • resonance frequency fs = 50 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 85,5 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 6,1 N/A
  • voice coil inductance L = 0,76 mH
  • effective piston radiating area Sd = 50 cm2
  • effective mechanical mass incl. air load mms = 6,8 g
  • equivalent volume of compliance Vas = 5 l
  • total Q factor Qts = 0,29 (Qms=2,34, Qes=0,33)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 95.6 mm
  • overall diameter d = 120,4 mm
  • mounting depth (not countersunk) t = 58,5 mm
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 9,3 L volume
from 64/40 Hz (-3dB/-8dB)
 
recommended cabinet 2:
24 L volume bass reflex cabinet
with HP70 reflex tube, 38 cm long.
from 38/28 Hz (-3dB/-8dB).

W221 AL (H1208)       order no. I-1381013       - not available (_)
20 cm bass driver with aluminium cone.
  • power handling (continuous/programme) = 125/300 W
  • frequency range = 20-1000 Hz
  • resonance frequency fs = 21 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86,5 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 10,7 N/A
  • voice coil inductance L = 3,76 mH
  • effective piston radiating area Sd = 220 cm2
  • effective mechanical mass incl. air load mms = 40 g
  • equivalent volume of compliance Vas = 93 l
  • total Q factor Qts = 0,27 (Qms=3,13, Qes=0,29)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 186,4 mm
  • overall diameter d = 220,6 mm
  • mounting depth (not countersunk) t = 90 mm
PDF data sheet

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 29 L volume
from 48/31 Hz (-3dB/-8dB)
 
recommended cabinet 2:
94 L volume bass reflex cabinet
with HP100 reflex tube, 33 cm long.
from 26/20 Hz (-3dB/-8dB).

W260 AL (H1209)       order no. I-1381010       - not available (_)
25 cm bass driver with aluminium cone.
  • power handling (continuous/programme) = 125/300 W
  • frequency range = 20-1000 Hz
  • resonance frequency fs = 20 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 10,7 N/A
  • voice coil inductance L = 1,83 mH
  • effective piston radiating area Sd = 330 cm2
  • effective mechanical mass incl. air load mms = 53 g
  • equivalent volume of compliance Vas = 171 l
  • total Q factor Qts = 0,33 (Qms=2,15, Qes=0,39)
  • voice coil diameter = 51 mm
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 232,2 mm
  • overall diameter d = 269 mm
  • mounting depth (not countersunk) t = 107,5 mm
PDF data sheet

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 2,6 L volume
from 104/65 Hz (-3dB/-8dB)
 
recommended cabinet 2:
8,5 L volume bass reflex cabinet
with HP50 reflex tube, 20 cm long.
from 55/43 Hz (-3dB/-8dB).

WA150 (H1216)       order no. I-1381015       - not available (_)
13 cm bass driver with paper cone.
  • power handling (continuous/programme) = 60/250 W
  • frequency range = 50-4000 Hz
  • resonance frequency fs = 44 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87,5 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 5,5 N/A
  • voice coil inductance L = 0,82 mH
  • effective piston radiating area Sd = 80 cm2
  • effective mechanical mass incl. air load mms = 7,7 g
  • equivalent volume of compliance Vas = 14 l
  • total Q factor Qts = 0,34 (Qms=1,88, Qes=0,42)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 112 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 67,5 mm
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 4,9 L volume
from 90/57 Hz (-3dB/-8dB)
 
recommended cabinet 2:
14,8 L volume bass reflex cabinet
with HP50 reflex tube, 14 cm long.
from 49/38 Hz (-3dB/-8dB).

WA180 (H1215)       order no. I-1381014       - not available (_)
16 cm bass driver with paper cone.
  • power handling (continuous/programme) = 80/250 W
  • frequency range = 45-3000 Hz
  • resonance frequency fs = 35 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88,5 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • force factor BL = 7,2 N/A
  • voice coil inductance L = 1,2 mH
  • effective piston radiating area Sd = 136 cm2
  • effective mechanical mass incl. air load mms = 14 g
  • equivalent volume of compliance Vas = 33 l
  • total Q factor Qts = 0,31 (Qms=1,9, Qes=0,37)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 145,2 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 78 mm
PDF data sheet

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 5,6 L volume
from 85/54 Hz (-3dB/-8dB)
 
recommended cabinet 2:
17 L volume bass reflex cabinet
with HP50 reflex tube, 14 cm long.
from 46/36 Hz (-3dB/-8dB).

WA180 NAL (H1085)       order no. I-1381016       - not available (_)
16 cm bass driver with aluminium cone.
  • power handling (continuous/programme) = 80/250 W
  • frequency range = 35-2500 Hz
  • resonance frequency fs = 33 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 6,5 N/A
  • voice coil inductance L = 0,92 mH
  • effective piston radiating area Sd = 125 cm2
  • effective mechanical mass incl. air load mms = 12,7 g
  • equivalent volume of compliance Vas = 38 l
  • total Q factor Qts = 0,31 (Qms=2,01, Qes=0,37)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 145,2 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 73 mm
PDF data sheet

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 2,5 L volume
from 98/62 Hz (-3dB/-8dB)
 
recommended cabinet 2:
8,8 L volume bass reflex cabinet
with HP35 reflex tube, 10 cm long.
from 51/40 Hz (-3dB/-8dB).

WA151 AL (H1141)       order no. I-1381004       - not available (_)
13 cm bass driver with aluminium cone.
  • power handling (continuous/programme) = 80/200 W
  • frequency range = 45-3000 Hz
  • resonance frequency fs = 44 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 5,7 N/A
  • voice coil inductance L = 0,84 mH
  • effective piston radiating area Sd = 75 cm2
  • effective mechanical mass incl. air load mms = 8,1 g
  • equivalent volume of compliance Vas = 12 l
  • total Q factor Qts = 0,36 (Qms=2,1, Qes=0,43)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 112 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 67,5 mm
PDF data sheet

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 4,5 L volume
from 93/58 Hz (-3dB/-8dB)
 
recommended cabinet 2:
13,5 L volume bass reflex cabinet
with HP50 reflex tube, 15 cm long.
from 51/39 Hz (-3dB/-8dB).

WA181 AL (H1224)       order no. I-1381005       - not available (_)
16 cm bass driver with aluminium cone.
  • power handling (continuous/programme) = 100/250 W
  • frequency range = 40-2500 Hz
  • resonance frequency fs = 36 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • force factor BL = 7,2 N/A
  • voice coil inductance L = 1,06 mH
  • effective piston radiating area Sd = 126 cm2
  • effective mechanical mass incl. air load mms = 13,6 g
  • equivalent volume of compliance Vas = 30 l
  • total Q factor Qts = 0,31 (Qms=2,09, Qes=0,36)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 145,2 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 78 mm
PDF data sheet

show kits to this chassis hide kits

K19 F       order no. not-available       - not available
19 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 90/120 W
  • frequency range = 2000-20000 Hz
  • resonance frequency fs = 1700 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • voice coil diameter = 19 mm
  • mounting diameter d = 67 mm
  • overall diameter d = 94 mm
  • mounting depth (not countersunk) t = 24 mm

show kits to this chassis hide kits

KT19 F       order no. not-available       - not available
19 mm tweeter with fabric cone.
  • power handling (continuous/programme) = 90/120 W
  • frequency range = 2000-20000 Hz
  • resonance frequency fs = 1700 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • voice coil diameter = 19 mm
  • mounting diameter d = 67 mm
  • overall diameter d = 94 mm
  • mounting depth (not countersunk) t = 24 mm

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 2,1 L volume
from 100/63 Hz (-3dB/-8dB)
 
recommended cabinet 2:
6,3 L volume bass reflex cabinet
with HP35 reflex tube, 14 cm long.
from 55/42 Hz (-3dB/-8dB).

W14 AL       order no. not-available       - not available
12 cm bass driver with aluminium cone.
  • power handling (continuous/programme) = 80/200 W
  • frequency range = 45-3000 Hz
  • resonance frequency fs = 39 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 85,5 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • effective piston radiating area Sd = 75 cm2
  • equivalent volume of compliance Vas = 14 l
  • total Q factor Qts = 0,31 (Qms=1,8, Qes=0,38)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 113 mm
  • overall diameter d = 133 mm
  • mounting depth (not countersunk) t = 69 mm

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 11,3 L volume
from 80/50 Hz (-3dB/-8dB)
 
recommended cabinet 2:
36 L volume bass reflex cabinet
with HP100 reflex tube, 31 cm long.
from 43/33 Hz (-3dB/-8dB).

WP211 D       order no. not-available       - not available
20 cm bass driver with polypropylene cone.
  • power handling (continuous/programme) = 120/180 W
  • frequency range = 35-2500 Hz
  • resonance frequency fs = 33 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • effective piston radiating area Sd = 223 cm2
  • equivalent volume of compliance Vas = 66 l
  • total Q factor Qts = 0,33 (Qms=1,8, Qes=0,41)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 187 mm
  • overall diameter d = 216 mm
  • mounting depth (not countersunk) t = 80 mm

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 3,7 L volume
from 101/64 Hz (-3dB/-8dB)
 
recommended cabinet 2:
10,9 L volume bass reflex cabinet
with HP50 reflex tube, 16 cm long.
from 56/43 Hz (-3dB/-8dB).

WP180XP coax (T18 RE coax)       order no. not-available       - not available
16 cm coax driver with high quality cone.
  • power handling (continuous/programme) = 80/250 W
  • frequency range = 40-25000 Hz
  • resonance frequency fs = 38 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • effective piston radiating area Sd = 120 cm2
  • equivalent volume of compliance Vas = 27 l
  • total Q factor Qts = 0,3 (Qms=1,11, Qes=0,41)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 145 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 95 mm

show kits to this chassis hide kits

K30 D       order no. not-available       - not available
26 mm tweeter with metal cone.
  • power handling (continuous/programme) = 90/140 W
  • frequency range = 1600-25000 Hz
  • resonance frequency fs = 650 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 4,8 Ohm
  • effective piston radiating area Sd = 7 cm2
  • voice coil diameter = 26 mm
  • mounting diameter d = 75 mm
  • overall diameter d = 104 mm
  • mounting depth (not countersunk) t = 42 mm

show kits to this chassis hide kits

P21REX/DD (H596)       order no. not-available       - not available
$dd cm bass driver with high quality cone.

show kits to this chassis hide kits

Exotic-Series   Tweeter   Coaxial speaker   Mids   Woofer   Design by Seas   Passive Radiators   no longer sold  
The cabinet volume calculations are executed considering an external resistance of 0.3 Ohm. We are using, if no other data is known or available, the information supplied by the manufacturer.

Please note: the frequency response doesn't say much about the cut-off frequency inside the cabinet! Therefore, we mostly give you 2 examples with dimensioning considerations and an indication, how low the loudspeaker will reproduce.

Home  
 
© Copyright 2016 Iris Strassacker; All rights reserved. - errors and omissions excepted