Tweeter   Woofer   Coaxial speaker   no longer sold  

Excel

The Nordic Seas Excel loudspeaker drivers are top components. They are usually found in finished loudspeakers of the upper price segment.

We are offering quite a few kits like Thor Evo 04 or Audimax.
 


 

Tweeter

chassis/seas_excel_e0006_t25cf001.jpg

T25CF001 (E0006-06)       order no. seas-E0006-06      
26 mm dome tweeter with fabric dome.
  • power handling (continuous/programme) = 90/200(>2500Hz/12dB) W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 700 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 4,6 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7 cm2
  • effective mechanical mass incl. air load mms = 0,33 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 110 mm
  • mounting depth (not countersunk) t = 53 mm
PDF data sheet

show kits to this chassis hide kits

chassis/seas_excel_e0011_t25cf002.jpg

T25CF002 (E0011-06)       order no. seas-E0011-06      
26 mm dome tweeter with fabric dome.
  • power handling (continuous/programme) = 90/200(>2500Hz/12dB) W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 500 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 4,6 Ohm
  • force factor BL = 3,1 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7 cm2
  • effective mechanical mass incl. air load mms = 0,37 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,5 mm
  • mounting diameter d = 75 mm
  • overall diameter d = 110 mm
  • mounting depth (not countersunk) t = 41 mm
PDF data sheet

show kits to this chassis hide kits

chassis/seas_excel_e0036_t25c003.jpg

T25C003 (E0036-06)       order no. seas-E0036-06      
26 mm dome tweeter with fabric dome.
  • power handling (continuous/programme) = 90/200(>2500Hz/12dB) W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 600 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 4,6 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 7 cm2
  • effective mechanical mass incl. air load mms = 0,33 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 73 mm
  • overall diameter d = 110 mm
  • mounting depth (not countersunk) t = 59 mm
PDF data sheet

show kits to this chassis hide kits

chassis/seas_excel_e0039_t29af001.jpg

T29AF001 (E0039)       order no. seas-E0039-06      
26 mm dome tweeter with aluminium dome.
  • power handling (continuous/programme) = 100/220(>2500Hz/12dB) W
  • frequency range = 2000-22000 Hz
  • resonance frequency fs = 500 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 4,7 Ohm
  • force factor BL = 3,9 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 8 cm2
  • effective mechanical mass incl. air load mms = 0,39 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,5 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 110 mm
  • mounting depth (not countersunk) t = 43 mm
PDF data sheet

show kits to this chassis hide kits

chassis/seas_excel_e0038_t29cf001.jpg#chassis/seas_excel_e0038_t29cf001_gross.jpg

T29CF001 (E0038-06)       order no. seas-E0038-06      
26 mm dome tweeter with fabric dome.
  • power handling (continuous/programme) = 90/200(>2500Hz/12dB) W
  • frequency range = 2000-25002 Hz
  • resonance frequency fs = 550 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 93 dB (2,83V; 1m)
  • DC resistance Re = 4,7 Ohm
  • force factor BL = 3,9 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 8 cm2
  • effective mechanical mass incl. air load mms = 0,35 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,5 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 110 mm
  • mounting depth (not countersunk) t = 43 mm
PDF data sheet

show kits to this chassis hide kits

chassis/seas_excel_e0040_t29cf002.jpg

T29CF002 (E0040-06) Crescendo       order no. seas-E0040-06      
26 mm dome tweeter with fabric dome.
  • power handling (continuous/programme) = 90/200 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 500 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92,5 dB (2,83V; 1m)
  • DC resistance Re = 4,7 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 8 cm2
  • effective mechanical mass incl. air load mms = 0,35 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,5 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 110 mm
  • mounting depth (not countersunk) t = 43 mm
PDF data sheet

show kits to this chassis hide kits

chassis/seas_excel_e0047_t29_mf001.jpg#chassis/seas_excel_e0047_t29_mf001_gross.jpg

T29MF001 (E0047-04) Magnum       order no. seas-E0047-04      
26 mm dome tweeter with magnesium dome.
  • power handling (continuous/programme) = 90/200 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 500 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 3,5 Ohm
  • force factor BL = 3 N/A
  • voice coil inductance L = 0,03 mH
  • effective piston radiating area Sd = 8 cm2
  • effective mechanical mass incl. air load mms = 0,35 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,7 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 110 mm
  • mounting depth (not countersunk) t = 40 mm
PDF data sheet

show kits to this chassis hide kits

chassis/seas_excel_e0058_06_t29b001.jpg#chassis/seas_excel_e0058_06_t29b001_gross.jpg

T29B001 (E0058-06) Beryllium       order no. seas-E0058-06      
26 mm dome tweeter with beryllium dome.
  • power handling (continuous/programme) = 90/200 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 533 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 93,6 dB (2,83V; 1m)
  • DC resistance Re = 4,6 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,01 mH
  • effective piston radiating area Sd = 8 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,25 mm
  • mounting diameter d = 85,5 mm
  • overall diameter d = 110 mm
  • mounting depth (not countersunk) t = 30 mm
PDF data sheet

show kits to this chassis hide kits

chassis/seas_excel_e0100_04_t29d001.jpg#chassis/seas_excel_e0100_04_t29d001_gross.jpg

T29D001 (E0100-04) Diamond       order no. seas-E0100-04      
26 mm dome tweeter with $spr_mmdi dome.
  • power handling (continuous/programme) = 55/150 W
  • frequency range = 1800-50000 Hz
  • resonance frequency fs = 530 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 3,8 Ohm
  • force factor BL = 2,5 N/A
  • voice coil inductance L = 0,01 mH
  • effective piston radiating area Sd = 8 cm2
  • effective mechanical mass incl. air load mms = 0,36 g
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 0,7 mm
  • mounting diameter d = 85 mm
  • overall diameter d = 100 mm
  • mounting depth (not countersunk) t = 33 mm
PDF data sheet

show kits to this chassis hide kits

chassis/seas_excel_e0055_t35c002.jpg#chassis/seas_excel_e0055_t35c002_gross.jpg

T35C002 (E0055-06)       order no. seas-E0055-06      
35 mm dome tweeter with fabric dome.
  • power handling (continuous/programme) = 100/250 W
  • frequency range = 1500-25000 Hz
  • resonance frequency fs = 620 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 4,6 Ohm
  • force factor BL = 4,3 N/A
  • voice coil inductance L = 0,06 mH
  • effective piston radiating area Sd = 11,9 cm2
  • effective mechanical mass incl. air load mms = 0,47 g
  • voice coil diameter = 35 mm
  • maximum peak linear excursion vibration xlin = +/- 0,5 mm
  • mounting diameter d = 85,5 mm
  • overall diameter d = 110 mm
  • mounting depth (not countersunk) t = 30 mm
PDF data sheet

show kits to this chassis hide kits


 

Woofer

chassis/seas_excel_e0021_w12cy001.jpg

W12CY001 (E0021-08S)       order no. seas-E0021-08S      
11 cm bass driver with magnesium cone.
  • power handling (continuous/programme) = 70/200 W
  • frequency range = 60-3500 Hz
  • resonance frequency fs = 45 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 84 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 5,4 N/A
  • voice coil inductance L = 0,43 mH
  • effective piston radiating area Sd = 50 cm2
  • effective mechanical mass incl. air load mms = 7,5 g
  • equivalent volume of compliance Vas = 6 l
  • total Q factor Qts = 0,36 (Qms=2,5, Qes=0,42)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 99 mm
  • overall diameter d = 120,4 mm
  • mounting depth (not countersunk) t = 66,5 mm
PDF data sheet

show kits to this chassis hide kits

chassis/seas_excel_e0044_w12cy003.jpg

W12CY003 (E0044-08S)       order no. seas-E0044-08S      
11 cm bass driver with paper cone.
  • power handling (continuous/programme) = 70/200 W
  • frequency range = 60-3500 Hz
  • resonance frequency fs = 60 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 85,5 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 5,5 N/A
  • voice coil inductance L = 0,41 mH
  • effective piston radiating area Sd = 50 cm2
  • effective mechanical mass incl. air load mms = 6,1 g
  • equivalent volume of compliance Vas = 4 l
  • total Q factor Qts = 0,37 (Qms=2,3, Qes=0,44)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 99 mm
  • overall diameter d = 120,4 mm
  • mounting depth (not countersunk) t = 66,5 mm
PDF data sheet

show kits to this chassis hide kits

chassis/seas_excel_e0015_w15cy001.jpg

W15CY001 (E0015-08S)       order no. seas-E0015-08S      
13 cm bass driver with magnesium cone.
  • power handling (continuous/programme) = 70/200 W
  • frequency range = 50-3000 Hz
  • resonance frequency fs = 38 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 85,5 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 5,5 N/A
  • voice coil inductance L = 0,49 mH
  • effective piston radiating area Sd = 75 cm2
  • effective mechanical mass incl. air load mms = 9,5 g
  • equivalent volume of compliance Vas = 14 l
  • total Q factor Qts = 0,36 (Qms=2,22, Qes=0,43)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 112 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 75,5 mm
PDF data sheet

show kits to this chassis hide kits

chassis/seas_excel_e0037_w15ch001.jpg

W15CH001 (E0037-08S)       order no. seas-E0037-08S      
13 cm bass driver with magnesium cone.
  • power handling (continuous/programme) = 70/200 W
  • frequency range = 50-3000 Hz
  • resonance frequency fs = 38 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 85 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 5,1 N/A
  • voice coil inductance L = 0,49 mH
  • effective piston radiating area Sd = 75 cm2
  • effective mechanical mass incl. air load mms = 9,5 g
  • equivalent volume of compliance Vas = 14 l
  • total Q factor Qts = 0,42 (Qms=2,58, Qes=0,5)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 112 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 76 mm
PDF data sheet

show kits to this chassis hide kits

chassis/seas_excel_e0041_w15ly001.jpg

W15LY001 (E0041-08S)       order no. seas-E0041-08S      
13 cm bass driver with paper cone.
  • power handling (continuous/programme) = 60/250 W
  • frequency range = 50-4000 Hz
  • resonance frequency fs = 49 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86,5 dB (2,83V; 1m)
  • DC resistance Re = 5,7 Ohm
  • force factor BL = 4,6 N/A
  • voice coil inductance L = 0,3 mH
  • effective piston radiating area Sd = 75 cm2
  • effective mechanical mass incl. air load mms = 6,28 g
  • equivalent volume of compliance Vas = 12 l
  • total Q factor Qts = 0,45 (Qms=2,21, Qes=0,56)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 112 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 75,5 mm
PDF data sheet

show kits to this chassis hide kits

chassis/seas_excel_e0043_m15ch002.jpg

M15CH002 (E0043-06S)       order no. seas-E0043-06S      
13 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 70/200 W
  • frequency range = 60-3500 Hz
  • resonance frequency fs = 67 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 88,5 dB (2,83V; 1m)
  • DC resistance Re = 4,9 Ohm
  • force factor BL = 5,3 N/A
  • voice coil inductance L = 0,43 mH
  • effective piston radiating area Sd = 75 cm2
  • effective mechanical mass incl. air load mms = 6,75 g
  • equivalent volume of compliance Vas = 6 l
  • total Q factor Qts = 0,4 (Qms=1,7, Qes=0,52)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 112 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 76 mm
PDF data sheet

show kits to this chassis hide kits

chassis/seas_excel_e0049_04_w16nx001.jpg

W16NX001 (E0049-04S)       order no. seas-E0049-04S      
13 cm bass driver with magnesium cone.
  • power handling (continuous/programme) = 80/250 W
  • frequency range = 45-2500 Hz
  • resonance frequency fs = 37 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 3 Ohm
  • force factor BL = 5,3 N/A
  • voice coil inductance L = 0,25 mH
  • effective piston radiating area Sd = 94 cm2
  • effective mechanical mass incl. air load mms = 14,8 g
  • equivalent volume of compliance Vas = 15 l
  • total Q factor Qts = 0,33 (Qms=2,66, Qes=0,38)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 126 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 73,5 mm
PDF data sheet

show kits to this chassis hide kits

chassis/seas_excel_e0049_04_w16nx001.jpg

W16NX001 (E0049-08S)       order no. seas-E0049-08S      
13 cm bass driver with magnesium cone.
  • power handling (continuous/programme) = 80/250 W
  • frequency range = 45-2500 Hz
  • resonance frequency fs = 39 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 85 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 7,3 N/A
  • voice coil inductance L = 0,41 mH
  • effective piston radiating area Sd = 94 cm2
  • effective mechanical mass incl. air load mms = 13,9 g
  • equivalent volume of compliance Vas = 14 l
  • total Q factor Qts = 0,34 (Qms=2,16, Qes=0,41)
  • voice coil diameter = 38 mm
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 126 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 73,5 mm
PDF data sheet

show kits to this chassis hide kits

chassis/seas_excel_e0017_08_w18ex001.jpg#chassis/seas_excel_e0017_08_w18ex001_gross.jpg

W18EX001 (E0017-08S)       order no. seas-E0017-08S      
16 cm bass driver with magnesium cone.
  • power handling (continuous/programme) = 100/250 W
  • frequency range = 40-2500 Hz
  • resonance frequency fs = 34 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 8,4 N/A
  • voice coil inductance L = 0,65 mH
  • effective piston radiating area Sd = 126 cm2
  • effective mechanical mass incl. air load mms = 15,5 g
  • equivalent volume of compliance Vas = 30 l
  • total Q factor Qts = 0,26 (Qms=1,8, Qes=0,3)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 145 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 81 mm
PDF data sheet

show kits to this chassis hide kits

chassis/seas_excel_e0018_w18e001.jpg

W18E001 (E0018-08S)       order no. seas-E0018-08S      
16 cm bass driver with magnesium cone.
  • power handling (continuous/programme) = 100/250 W
  • frequency range = 40-2500 Hz
  • resonance frequency fs = 34 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 6,6 N/A
  • voice coil inductance L = 0,65 mH
  • effective piston radiating area Sd = 126 cm2
  • effective mechanical mass incl. air load mms = 15,5 g
  • equivalent volume of compliance Vas = 30 l
  • total Q factor Qts = 0,42 (Qms=2,91, Qes=0,49)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 145 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 81 mm
PDF data sheet

show kits to this chassis hide kits

chassis/seas_excel_e0042_w18nx001.jpg

W18NX001 (E0042-08S)       order no. seas-E0042-08S      
16 cm bass driver with paper cone.
  • power handling (continuous/programme) = 80/250 W
  • frequency range = 30-3000 Hz
  • resonance frequency fs = 40 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87,5 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 7 N/A
  • voice coil inductance L = 0,43 mH
  • effective piston radiating area Sd = 126 cm2
  • effective mechanical mass incl. air load mms = 13,7 g
  • equivalent volume of compliance Vas = 24 l
  • total Q factor Qts = 0,34 (Qms=2,08, Qes=0,41)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 145,2 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 81 mm
PDF data sheet

show kits to this chassis hide kits

chassis/seas_excel_e0022_w22ex001.jpg

W22EX001 (E0022-08S)       order no. seas-E0022-08S      
20 cm bass driver with magnesium cone.
  • power handling (continuous/programme) = 120/300 W
  • frequency range = 30-2000 Hz
  • resonance frequency fs = 25 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 8,1 N/A
  • voice coil inductance L = 0,61 mH
  • effective piston radiating area Sd = 220 cm2
  • effective mechanical mass incl. air load mms = 26,2 g
  • equivalent volume of compliance Vas = 98 l
  • total Q factor Qts = 0,34 (Qms=2,14, Qes=0,41)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 186,4 mm
  • overall diameter d = 220,6 mm
  • mounting depth (not countersunk) t = 93 mm
PDF data sheet

show kits to this chassis hide kits

chassis/seas_excel_e0045_w22ny001.jpg

W22NY001 (E0045-08S)       order no. seas-E0045-08S      
20 cm bass driver with paper cone.
  • power handling (continuous/programme) = 90/250 W
  • frequency range = 30-3000 Hz
  • resonance frequency fs = 33 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 8,8 N/A
  • voice coil inductance L = 0,61 mH
  • effective piston radiating area Sd = 220 cm2
  • effective mechanical mass incl. air load mms = 20 g
  • equivalent volume of compliance Vas = 72 l
  • total Q factor Qts = 0,3 (Qms=1,73, Qes=0,36)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 186,4 mm
  • overall diameter d = 220,6 mm
  • mounting depth (not countersunk) t = 100 mm
PDF data sheet

show kits to this chassis hide kits

chassis/seas_excel_e0026_w26fx001.jpg

W26FX001 (E0026-08S)       order no. seas-E0026-08S      
25 cm bass driver with magnesium cone.
  • power handling (continuous/programme) = 150/400 W
  • frequency range = 20-1000 Hz
  • resonance frequency fs = 20 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 10,7 N/A
  • voice coil inductance L = 1,43 mH
  • effective piston radiating area Sd = 330 cm2
  • effective mechanical mass incl. air load mms = 56,3 g
  • equivalent volume of compliance Vas = 162 l
  • total Q factor Qts = 0,35 (Qms=2,34, Qes=0,41)
  • voice coil diameter = 51 mm
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 232,2 mm
  • overall diameter d = 269 mm
  • mounting depth (not countersunk) t = 109,5 mm
PDF data sheet

show kits to this chassis hide kits

chassis/seas_excel_e0046_w26fx002.jpg

W26FX002 (E0046-08S)       order no. seas-E0046-08S      
25 cm bass driver with paper cone.
  • power handling (continuous/programme) = 100/300 W
  • frequency range = 30-1000 Hz
  • resonance frequency fs = 31 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 10,9 N/A
  • voice coil inductance L = 0,81 mH
  • effective piston radiating area Sd = 330 cm2
  • effective mechanical mass incl. air load mms = 42,4 g
  • equivalent volume of compliance Vas = 87 l
  • total Q factor Qts = 0,4 (Qms=2,55, Qes=0,47)
  • voice coil diameter = 51 mm
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 232,2 mm
  • overall diameter d = 269 mm
  • mounting depth (not countersunk) t = 109,5 mm
PDF data sheet

show kits to this chassis hide kits


 

Coaxial speaker

chassis/seas_excel_e0051_c16n001f.jpg#chassis/seas_excel_e0051_c16n001f_gross.jpg

C16N001/F (E0051-04/06S)       order no. seas-E0051-04-06S      
13 cm coax driver with magnesium cone.
  • power handling (continuous/programme) = 80/250 W
  • frequency range = 30-25000 Hz
  • resonance frequency fs = 37 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 85 dB (2,83V; 1m)
  • DC resistance Re = 3,2 Ohm
  • force factor BL = 4,4 N/A
  • voice coil inductance L = 0,27 mH
  • effective piston radiating area Sd = 94 cm2
  • effective mechanical mass incl. air load mms = 14,6 g
  • equivalent volume of compliance Vas = 15 l
  • total Q factor Qts = 0,49 (Qms=3,24, Qes=0,58)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 7 mm
  • mounting diameter d = 126 mm
  • overall diameter d = 146 mm
  • mounting depth (not countersunk) t = 85,5 mm
PDF data sheet

show kits to this chassis hide kits

chassis/seas_excel_e0060_c18en002_a.jpg#chassis/seas_excel_e0060_c18en002_a_gross.jpg

C18EN002/A (E0060-08/06)       order no. seas-E0060-08-06S      
17 cm coax driver with magnesium cone.
  • power handling (continuous/programme) = 100/250 W
  • frequency range = 150-30000 Hz
  • resonance frequency fs = 85 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 8,8 N/A
  • voice coil inductance L = 0,46 mH
  • effective piston radiating area Sd = 131 cm2
  • effective mechanical mass incl. air load mms = 15,3 g
  • equivalent volume of compliance Vas = 5 l
  • total Q factor Qts = 0,54 (Qms=1,99, Qes=0,74)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 176 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 93 mm
PDF data sheet

show kits to this chassis hide kits


 

no longer sold

chassis/seas_excel_e0016_m15ch001.jpg#chassis/seas_excel_e0016_m15ch001_gross.jpg

M15CH001 (E0016-08S)       order no. not-available      
20 cm bass-midrange driver with high quality cone.
  • power handling (continuous/programme) = 100/300 W
  • frequency range = 150-3000 Hz
  • resonance frequency fs = 54 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 5,7 Ohm
  • force factor BL = 5,5 N/A
  • voice coil inductance L = 0,31 mH
  • effective piston radiating area Sd = 75 cm2
  • effective mechanical mass incl. air load mms = 5,8 g
  • equivalent volume of compliance Vas = 10,9 l
  • total Q factor Qts = 0,3 (Qms=1,1, Qes=0,41)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
PDF data sheet

show kits to this chassis hide kits

W11 CY001       order no. not-available      
10 cm bass driver with paper cone.
  • power handling (continuous/programme) = 75/200 W
  • resonance frequency fs = 65 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86 dB (2,83V; 1m)
  • DC resistance Re = 5,7 Ohm
  • force factor BL = 5,6 N/A
  • voice coil inductance L = 0,32 mH
  • effective piston radiating area Sd = 50 cm2
  • effective mechanical mass incl. air load mms = 5,5 g
  • total Q factor Qts = 0,34 (Qms=1,8, Qes=0,42)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 96 mm
  • overall diameter d = 109,4 mm
  • mounting depth (not countersunk) t = 55,1 mm

show kits to this chassis hide kits

W11 CY002       order no. not-available      
10 cm midrange driver with magnesium cone.
  • power handling (continuous/programme) = 75/200 W
  • resonance frequency fs = 46 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 85 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 5,6 N/A
  • voice coil inductance L = 0,32 mH
  • effective piston radiating area Sd = 50 cm2
  • effective mechanical mass incl. air load mms = 7,2 g
  • equivalent volume of compliance Vas = 5,8 l
  • total Q factor Qts = 0,31 (Qms=1,9, Qes=0,37)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 96 mm
  • overall diameter d = 109,4 mm
  • mounting depth (not countersunk) t = 55,1 mm

show kits to this chassis hide kits

chassis/seas_excel_e0008_w14cy001.jpg

W14 CY001       order no. not-available      
12 cm bass driver with magnesium cone.
  • power handling (continuous/programme) = 75/120 W
  • resonance frequency fs = 43 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 5,4 Ohm
  • force factor BL = 5,8 N/A
  • voice coil inductance L = 0,37 mH
  • effective piston radiating area Sd = 75 cm2
  • effective mechanical mass incl. air load mms = 9,6 g
  • equivalent volume of compliance Vas = 10,6 l
  • total Q factor Qts = 0,35 (Qms=1,8, Qes=0,44)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 113 mm
  • overall diameter d = 133,2 mm
  • mounting depth (not countersunk) t = 65,3 mm
PDF data sheet

show kits to this chassis hide kits

W17 E002       order no. not-available      
16 cm bass driver with magnesium cone.
  • power handling (continuous/programme) = 100/250 W
  • resonance frequency fs = 34 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 6,4 Ohm
  • force factor BL = 7,8 N/A
  • voice coil inductance L = 0,4 mH
  • effective piston radiating area Sd = 126 cm2
  • effective mechanical mass incl. air load mms = 15,5 g
  • equivalent volume of compliance Vas = 29,5 l
  • total Q factor Qts = 0,32 (Qms=2,4, Qes=0,37)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 146 mm
  • overall diameter d = 170,4 mm
  • mounting depth (not countersunk) t = 67,7 mm

show kits to this chassis hide kits

W17 EX001       order no. not-available      
16 cm bass driver with glass fibre cone.
  • power handling (continuous/programme) = 100/250 W
  • resonance frequency fs = 37 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 8,5 N/A
  • voice coil inductance L = 0,32 mH
  • effective piston radiating area Sd = 130 cm2
  • effective mechanical mass incl. air load mms = 15 g
  • equivalent volume of compliance Vas = 27,4 l
  • total Q factor Qts = 0,32 (Qms=3,38, Qes=0,35)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 145,3 mm
  • overall diameter d = 170,4 mm
  • mounting depth (not countersunk) t = 67,7 mm

show kits to this chassis hide kits

W17 EX002       order no. not-available      
16 cm bass driver with magnesium cone.
  • power handling (continuous/programme) = 100/250 W
  • resonance frequency fs = 34 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 6,4 Ohm
  • force factor BL = 8,6 N/A
  • voice coil inductance L = 0,4 mH
  • effective piston radiating area Sd = 126 cm2
  • effective mechanical mass incl. air load mms = 15,5 g
  • equivalent volume of compliance Vas = 29,5 l
  • total Q factor Qts = 0,26 (Qms=2,1, Qes=0,3)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 146 mm
  • overall diameter d = 170,4 mm
  • mounting depth (not countersunk) t = 67,7 mm

show kits to this chassis hide kits

W21 EX001       order no. not-available      
20 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 120/300 W
  • resonance frequency fs = 31 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 6,4 Ohm
  • force factor BL = 8,5 N/A
  • voice coil inductance L = 0,32 mH
  • effective piston radiating area Sd = 220 cm2
  • effective mechanical mass incl. air load mms = 25 g
  • equivalent volume of compliance Vas = 64 l
  • total Q factor Qts = 0,41 (Qms=2,73, Qes=0,48)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 186,8 mm
  • overall diameter d = 215,4 mm
  • mounting depth (not countersunk) t = 75,3 mm

show kits to this chassis hide kits

W21 E002       order no. not-available      
20 cm bass driver with magnesium cone.
  • power handling (continuous/programme) = 120/300 W
  • resonance frequency fs = 29 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 6,4 Ohm
  • force factor BL = 7,9 N/A
  • voice coil inductance L = 0,4 mH
  • effective piston radiating area Sd = 220 cm2
  • effective mechanical mass incl. air load mms = 28 g
  • equivalent volume of compliance Vas = 69 l
  • total Q factor Qts = 0,47 (Qms=3,2, Qes=0,55)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 187 mm
  • overall diameter d = 215,4 mm
  • mounting depth (not countersunk) t = 80,3 mm

show kits to this chassis hide kits

W21 E002-4       order no. not-available      
20 cm bass driver with magnesium cone.
  • power handling (continuous/programme) = 120/300 W
  • resonance frequency fs = 33 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 2,9 Ohm
  • force factor BL = 5,4 N/A
  • voice coil inductance L = 0,24 mH
  • effective piston radiating area Sd = 220 cm2
  • effective mechanical mass incl. air load mms = 26 g
  • equivalent volume of compliance Vas = 69 l
  • total Q factor Qts = 0,51 (Qms=4,42, Qes=0,58)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 187 mm
  • overall diameter d = 215,4 mm
  • mounting depth (not countersunk) t = 80,3 mm

show kits to this chassis hide kits

W21 EX002       order no. not-available      
20 cm bass driver with magnesium cone.
  • power handling (continuous/programme) = 120/300 W
  • resonance frequency fs = 28 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 6,4 Ohm
  • force factor BL = 9,2 N/A
  • voice coil inductance L = 0,5 mH
  • effective piston radiating area Sd = 220 cm2
  • effective mechanical mass incl. air load mms = 29 g
  • equivalent volume of compliance Vas = 69 l
  • total Q factor Qts = 0,36 (Qms=2,7, Qes=0,41)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 187 mm
  • overall diameter d = 215,4 mm
  • mounting depth (not countersunk) t = 80,3 mm

show kits to this chassis hide kits

Tweeter   Woofer   Coaxial speaker   no longer sold  
The cabinet volume calculations are executed considering an external resistance of 0.3 Ohm. We are using, if no other data is known or available, the information supplied by the manufacturer.

Please note: the frequency response doesn't say much about the cut-off frequency inside the cabinet! Therefore, we mostly give you 2 examples with dimensioning considerations and an indication, how low the loudspeaker will reproduce.

Home  
 
© Copyright 2012 Iris Strassacker; All rights reserved. - errors and omissions excepted