18s 10 W 500

With the help of the chassis overview page you find more than 5000 loudspeaker chassis.

=> more loudspeakers of this brand.
 


open a bigger photo

recommended cabinet 1:
closed cabinet with 5,8 L volume
from 146/92 Hz (-3dB/-8dB)
 
recommended cabinet 2:
16 L volume bass reflex cabinet
with HP100 reflex tube, 19 cm long.
from 82/62 Hz (-3dB/-8dB).

18s 10 W 500       order no. 18s-10w500       EUR 146,00 excl. VAT: € 122.69 / $ 143.55
25 cm bass driver with paper cone. The basket is made of die-cast.
  • power handling (continuous/programme) = 280/400 W
  • frequency range = 55-4500 Hz
  • resonance frequency fs = 53 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 98 dB (2,83V; 1m)
  • DC resistance Re = 6 Ohm
  • force factor BL = 14,6 N/A
  • voice coil inductance L = 0,72 mH
  • effective piston radiating area Sd = 350 cm2
  • effective mechanical mass incl. air load mms = 33 g
  • equivalent volume of compliance Vas = 45,2 l
  • total Q factor Qts = 0,29 (Qms=4,22, Qes=0,31)
  • voice coil diameter = 51 mm
  • maximum peak linear excursion vibration xlin = +/- 5,5 mm
  • mounting diameter d = 232 mm
  • overall diameter d = 260 mm
  • mounting depth (not countersunk) t = 121,5 mm
  • mass m = 4,7 kg
PDF data sheet
The cabinet volume calculations are executed considering an external resistance of 0.3 Ohm. We are using, if no other data is known or available, the information supplied by the manufacturer.

Please note: the frequency response doesn't say much about the cut-off frequency inside the cabinet! Therefore, we mostly give you 2 examples with dimensioning considerations and an indication, how low the loudspeaker will reproduce.

Home  
 
© Copyright 2015 Iris Strassacker; All rights reserved. - errors and omissions excepted